CVE2323 Structural Systems Report: Analytical & Computational Study of Portal and Frame Structures
| University | University of Glasgow (UOG) |
| Subject | CVE2323: Structural Analysis 2 |
Objectives:
- Understand understanding of structural behaviour.
- Understand the differences in numerical, analytical results.
Part A: Matrix analysis method
Consider the following structural system shown in Figure 1.
Use the Matrix analysis method to analyse the structural response of the portal frame.
E=4500ksi, I=3500in4, Poisson Ratio=0.1 and Area=180 in2.
a) Determine slope and vertical deflection at point “B”
b) Find reactions and draw BMD, SFD for the Frame Structure.
Part B: Structural behaviour
1) Use Matrix analysis method and STAAD. PRO to determine internal force diagrams (bending moments, shear and axial forces), reaction forces and sway (horizontal displacement of beam) of the following four systems:
B.1 uniform frame and offset load (Figure 2)
B.2 nonuniform frame and offset load (Figure 3)
B.3 nonuniform frame and centric load (Figure 4)
B.4 uniform frame and centric load (Figure 5).
Sectional properties 1: Solid rectangular cross-section with a depth of 2 mm and an out of plane thickness of 15 mm (Calculate the corresponding A1 and I1).
Hire a Professional Essay & Assignment Writer for completing your Academic Assessments
Sectional properties 2: Solid rectangular cross-section with a depth of 1.5 mm and an out of plane thickness of 15 mm (Calculate the corresponding A2 and I2).
Load: Force F = 4.9 N
Material properties: Young’s modulus E = 100,000 N/mm2
Figure 2: System B.1: uniform frame and offset load
Figure 3: System B.2: nonuniform frame and offset load.
Figure 4: System B.3: nonuniform frame and centric load.
Figure 5: System B.4: uniform frame and centric load.
2) Discuss differences in internal force distributions (axial force, shear force and bending moment diagrams) and reaction forces for the systems B.1 to B.4
3) Discuss how the sway of the frame (sway is the horizontal displacement of the horizontal beam) is influence by position of the load and the nonuniform properties of the frame.
4) Investigate the importance of the axial stiffness on the STAAD.PRO results for the system with the largest sway. Would it acceptable to assume that the members are inextensible?
5) Summarise the key results in the form of all reactions and the sway for all 4 systems in a table
Buy Custom Answer of This Assessment & Raise Your Grades
Report
The report should contain the following minimum contents:
PART A
- Description of the problem
- Summary of the results in the form of a comparison of reaction forces and internal force diagrams (BMD, AFD, SFD) of the reference solution and the solution of the force method. Comment on any differences in the solution.
- Description of calculation steps, intermediate internal force diagrams and reaction forces for the auxiliary systems.
PART B
- Description of the problem.
- Matrix analysis B.1 ~ B.4 Frame and calculate the reaction forces, draw internal force diagrams.
- Comparison of the internal force diagrams, reaction forces and sway of STAAD.PRO analyses
- Discussion of the influence of load position and cross-sectional properties on the response of the frame
- Conclusions
STAAD.PRO screenshots are only permitted in the report if a white background is used and the labels are clearly readable!
You are very welcome to include hand written calculations and hand drawn internal force diagrams in your report.
Submission Guidelines
Please note that standard rules for late submission of coursework apply.
- Reduction of two subgrades (e.g. B1 to B3) for each working day late, up to a maximum of 5 days.
- Zero mark if more than 5 days late.
- It is essential that you still submit any late coursework, even if you are going to get zero marks for it (otherwise you cannot obtain any credits for this course).
Remember that the mark for CVE2221 counts towards your degree classification.
Marking
The marking will take into account in equal weights the presentation of the results and the understanding.
Concerning the presentation, aim for the following:
- The main steps of the computation and calculation are well presented
- Results are clear and easily accessible
- The writing is accurate
- Good English
- All references to figures and equations are correct
- Enough information is provided to allow others to reproduce your results
Concerning the understanding, aim to provide sufficient comments to show that you have understood the underlying theory, which give you the presented results.
Stuck with a lot of homework assignments and feeling stressed ? Take professional academic assistance & Get 100% Plagiarism free papers
- ESG531 Circular Economy for a Sustainable Future Group-Based Assignment: Circular Transformation Roadmap for SMEs towards 2030
- Business Marketing Assignment: Showcasing Fresco Pizza Hub’s Competitive Advantage over MegaSlice Pizza
- ECE210 Advocacy and Collaborations with Families Assignment: Supporting Grieving Children Through Culturally Responsive and Family-Centred Practices
- ACC707 Accounting and Finance Assignment: Evaluating Investment Decisions, Budgeting Practices, and Financial Performance through Ratio Analysis
- NCO201 Learn to Learn, Learn for Life TMA01: Developing Self-Awareness and Strategies for Lifelong Learning
- PSS219 Public Safety and Security in Singapore Group-Based Assignment: Analyzing Ministry Strategies and Challenges from the 2025 Committee of Supply Debate
- MTH240 Engineering Mathematics I TMA: Applications of Linear Algebra in Engineering Problems and System Analysis
- Engaging Youth with IBM Skills Build Assignment: Developing Creative Approaches to Boost Skills and Career Prospects
- BUS368 Innovation Management and Digital Transformation Assignment: Managing Innovation and Uncertainty in Foldable, Trifold, and Stretchable Display Technologies
- BUS366 Assignment: Enhancing Process Efficiency and Recruitment Effectiveness through Lean Six Sigma Methodologies
UP TO 15 % DISCOUNT